Single girder suspension crane STAHL - picture 1
10 t

Single girder suspension crane STAHL

Buy

Chain hoist up to: 6.3 t
Wire rope hoist up to: 16 t
Capacity: 10 tonn

Features:

  • Innovative _ all control signals by preference transmitted by radio signal
  • Cable-free _ in conjunction with the radio control technology, the main power supply is designed as a conductor line, dispensing with festoon cables and cable trolley runway
  • Compact _ minimum approach dimensions and efficient utilisation of the width of the building
  • Convenient _ smooth starting and braking characteristics, on request with the modern SFD frequency inverters
  • Low wear _ movable trolley suspensions equalise any inaccuracy or distortion in the crane runway
  • Wide-ranging _ crane interlocks for overhead material transport across more than one building section

The single girder suspension crane requires very little space and runs on the bottom flange of the crane runway, which is mounted on roof beams or directly on the ceiling. The complete width of the hall is thus available. The distance between the load hook and side walls is extremely small in this case. With this type of crane it is possible to connect various suspension cranes with the help of a crane interlock to enable them to pass hoists with or without loads. In this way it is possible to reach any and every point in a combined system.

Specifications - Single girder suspension crane STAHL

Chain hoist up to 6.3 t
Wire rope hoist up to 16 t

Тame Hoists Type Lifting capacity (t) Maximum span (m)
2000 SH Wire rope EH-A / EH-B 2 20
2000 ST Chain EH-A / EH-B 2 20
3200 SH Wire rope EH-A / EH-B 3,2 20
3200 ST Chain EH-A / EH-B 3,2 20
5000 SH Wire rope EH-A / EH-B 5 20
5000 ST Chain EH-A / EH-B 5 20
6300 SH Wire rope EH-A / EH-B 6,3 20
8000 SH Wire rope EH-A / EH-B 8 20
10000 SH Wire rope EH-A / EH-B 10 20

Drawing - Single girder suspension crane STAHL

Drawing - Single girder suspension crane STAHL